15
ENGLISH
TIMER
Control Settings
Adjust the temperature of the sauna by simply turning the operating knob. Thermostat
support automatically the choosen temperature.
In case the heater overheats, the safety sensor will automatically stop the heater even if the
timer is on. Find out for what reason the heater overheated. The reason for this could be too
tightly placed sauna stones, heater´s location or inappropriate ventilation. If this occurs, find
out the cause and fix the problem before resetting the safety sensor. The reset button is
located below the temperature knob.A
The timer has 1-8 (white) hours presetting time and 1-4 (pink) hours operating time.
To start the heater at once, turn the knob to anywhere between 1-4 on the operating time
scale. The heater will start and remain on for the time selected.
To preset the timer, simply turn the knob to anywhere between 1-8. When the specific
number of hours is reached, the heater will start running and stay on for up to 4 hours if
you don´t turn it off earlier.
THERMOSTAT
Heating of the sauna
CAUTION!
Smoke and odor formation when heating up for the first time
Work materials from the manufacturing process will be present on the
new heating elements. These evaporate when the sauna heater is
heated up for the first time. This produces smoke and an unpleasant
odor. Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when operating the sauna heater for the
first time and if the heating elements for the sauna heater have been
changed. In this way you will prevent damage to health due to the
fumes and smoke produced when heating up for the first time.
1.
2.
3.
4.
Select the highest possible temperature in the sauna control.
Heat up the sauna heater for half an hour. Do NOT stay in the sauna
cabin during this period.
Allow the sauna cabin to ventilate thoroughly after heating up for the
first time.
If no smoke or odor is produced the next time the sauna heater is
heated up, you can start to use the sauna. If smoke or odor is
produced again, leave the sauna cabin immediately and repeat the
initial heating up process followed by ventilation.
Always check the sauna room before sw itching sauna heater on (to be sure
that the re is no combustibl e things within the
safety distances of the
heater or on the heater
). Ma ke sure that sauna room has been efficiently
vent ilated. If the output of the heater is proper it will take about an hour to
reach suitable tempe ratu re (Fig. 9). The tempe ratu re in sauna room should
be between +60 - + 90 °C, according to the preference of use r. Too
power ful heater will heat sauna room too quickly and the stones won't have
enough time to warm. The water pou red on the stones will not evapo rate,
but flow into the stone holde r. An underpowe red heate r, on the other hand,
would lead to an undesi rably long heating period.
