ENGLISH
3
INTRODUCTION OF THE SAUNOVA 2.0 CONTROL
Congratulations on your purchase of Saunova 2.0 Control Unit!
Saunova 2.0 Control Unit is developed to enhance your sauna bathing with a variety of
different features. It can adjust temperature, humidity, ventilation and light in your sauna.
The Saunova 2.0 Control Units are available on a separate or built-in mounting on the Power
Controller.
The following information provides you with instructions on adjusting the settings of the
control unit. Please, read this instruction manual carefully before using it. Familiarization of
key functions will give you a more enjoyable sauna experience.
Precautions
1. Only a qualified electrician is allowed to make electrical connections and repairs
on the unit. Use original parts only.
2. Disconnect the Power Controller and the Contactor Unit from the electrical circuit
before installation, opening the lid of the power controller or contactor unit and
repair.
3. Check power supply rating before installation.
4. Check the correct location of the sensor in the installation section of the manual.
It is very important to place the temperature sensor correctly as it closeness to
the air ventilation cools down the sensor and may lead to overheating.
5. The power controller can be operated in a room temperature 0-40°C. Do not
install it inside the sauna room!
6. Do not pour water in the control unit or clean it wet cloth. For cleaning purposes,
use a cleaning cloth that has been only slightly moistened with a mild soapy
solvent (dish detergent).
