22
4
Pausing operation for a longer
time period
Turn off main fuse of the sauna control in the fuse
box.
Operating instructions for the user - Figure
5
3
Operation
3. Confirm the selected time with the START /
STOP
8
key.
The remaining time is shown in the display
4
with a flashing dot. (selected time = remaining
time until heater starts).
After expiration of the pre-section time the dis-
play
4
indicates depending on the device type
00.00 or the temperature measured in the area
of the temperature sensor.
4. Set the desired temperature with the rotary
knob TEMPERATURE
6
in the range of
50 - 125 degrees Celsius.
5. To exit:
5.1 Press START / STOP
8
key.
The sauna heater turns off.
The display indicates 00.00
The signal lamp
3
HEATING goes out.
The control is ready for entering a selected
time or ready for a restart.
5.2 Press ON / OFF
2
key.
The sauna control is turned off.
NOTE:
The time needed for warm-up until the set tempera-
ture of the heater is reached varies, depending on
size of sauna and type of stove.
NOTE:
The temperature indication at the position of the tem-
perature sensor differs very significantly from that
of the temperature in the area of the sunbed.
