Sawmaster R1040, Руководство пользователя

Страница: 14 / 31

14
Cutting Depth
WARNING:
Choosing The Right Blade
1.
2.
3.
The blade shaft speed of this saw is exclusi-
bely designed for cutting with diamond saw
blades. The saw may only be used for
cutting natural and artificial stone materials,
do not cut wood or metal!
The saw uses diamond saw blades with
diameters up to 10”. Saw blades with larger
diameters must NOT be installed on the
saw.
Choose the correct type of saw blade for the
material to be cut and the required cutting
depth.
The recommended cutting depth is 1/4” below the cutting
table surface. The cutting clearance has been fixed from
original design.
Setting the blade too low may damage the cutting table and if set too
high, the blade may grab the material being cut, causing damage
and possibly injury.
Blade Diameter
Cutting Depth
8” 1-1/2”
10” 2-5/8”