Cutter Caution Label
Since the cutter blade can cause injury, do not insert fingers.
Caution Label for Hand Insertion
Since it may cause injury when coming in contact with the carriage, do not insert hand.
Figure 36
Concerning electric shock, short circuits, and fire
Warning
Do not install printer where it is humid or dusty.
It could lead to an electrical shock or fire.
Do not use a damaged power cable.
It could lead to electrical shock or fire.
Do not pull out or insert the power plug with wet hand
.
This could lead to electrical shock.
Do not insert or drop metal or flammable objects into the printer through openings.
It could lead to an electrical shock or fire.
If foreign substances or liquids such as water entered the printer, do not use the printer as it is. It could lead to
an electric shock or fire
.
Turn the power button OFF immediately and disconnect the power plug from outlet. Then contact the customer
support.
Do not block the vent with objects
.
If vent is blocked heat may accumulate inside the printer and may cause a fire.
Make sure to use the specified power supply
.
If a power supply other than the specified voltage is used, it could cause an electrical shock and fire.
Take power for the printer directly from the power socket
.
Do not use multiple plugs on the same socket. This could generate heat and might cause a fire.
23/26
