6
8. FINISHING THE
INSTALLATION
Step 1.
Loosen two of the four screws from
the mounting bracket and remove the
other two.
Step 2.
Remove the motor assembly from
the mounting bracket hook and engage
the key holes to the two screws previously
loosened.
Step 3.
Install the two screws previously
removed and tighten all four screws.
Figure 10
Figure 11
Figure 12
9. ATTACHING THE FAN
BLADES
Caution:
Motor is shipped with motor
support plate prevent movement during
transportation. Remove the screws from
the motor support plate, discard the motor
support plate and keep the light kit for
future use . (Fig. 11)
Insert the blades through the blade slot in
the decorative housing. Align the holes in
blade and blade bracket, secure with blade
support plate, screws and fiber washers
provided. (Fig. 11)
10. INSTALLATING THE
MOUNTING PLATE
Step 1.
Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove)
Step 2.
Place the key holes on the light kit
over the 2 screws previously loosened from
the mounting ring, turn mounting plate
until it locks in place at the narrow section
of the key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 12)
Mounting ring
Mounting plate
Screws
Blade
Slot
Screws
Screws
Fiber
washers
Blade support
plates
Screws
Motor support plate
