8
11. INSTALLING THE
SWITCH HOUSING
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
Step 1.
Remove the screws from the
mounting plate under the fan motor.
Step 2.
While holding the switch housing
under your fan, snap together the wire
connection plug. (Figure 16)
Step 3.
Raise the switch housing to the
mounting plate until the holes in switch
housing and mounting plate line up. Reinsert
screws to secure in place. (Figure 16)
Figure 16
Mounting plate
Connection plug
Screws
Switch housing
