3. SAFETY RULES
1. To reduce the risk of electrical shock, insure
electricity has been turned off at the circuit
breaker or fuse box before beginning.
2. All wiring must be in accordance with the
National Electrical Code and local electrical
codes. Electrical installation should be
performed by a qualified licensed electrician.
3.
WARNING:
To reduce the risk of electrical
shock and fire, do not use this fan with any
solid-state fan speed control device.
4.
WARNING:
To reduce the risk of personal
injury, use only the two steel screws (and
lock washers) provided with the outlet box for
mounting to the outlet box. Most outlet boxes
commonly used for the support of lighting
fixtures are not acceptable for fan support and
may need to be replaced, consult a qualified
electrician if in doubt.
_______________________________________
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK OR PERSONAL INJURY,
MOUNT FAN TO OUTLET BOX MARKET
“ACCEPTABLE FOR FAN SUPPORT”
.
_______________________________________
5. The outlet box and support structure must
be securely mounted and capable of reliably
supporting a minimum of 50 pounds. Use only
CUL Listed outlet boxes marked
“FOR FAN
SUPPORT”
.
6. The fan must be mounted with a minimum of 6
feet clearance.
7. Do not adjust fan heads while fan blades are
in motion. Fan must be turned off and blades
stopped before adjusting fan heads or reversing
direction.
8. Avoid placing objects in the path of the fan
heads.
9. To avoid personal injury or damage to the fan
and other items, be cautious when working
around or cleaning the fan.
10. Do not use water or detergents when cleaning
the fan or fan blades. A dry dust cloth or
lightly dampened cloth will be suitable for most
cleaning.
11. After making electrical connections, spliced
conductors should be turned upward and
pushed carefully up into the outlet box. The
wires should be spread apart with the grounded
conductor and the equipment-grounding
conductor on one side of the outlet box.
12. Electrical diagrams are reference only. Light
kit that are not packed with the fan must be
CUL Listed and marked suitable for use with
the model fan being installed. Switches must
be CUL General Use Switches. Refer to the
Instructions packaged with the light kits and
switches for proper assembly.
_______________________________________
WARNING
TO REDUCE THE RISK OF PERSONAL
INJURY, DO NOT INSERT OBJECTS IN THE
PATH OF THE BLADES.
_______________________________________
NOTE:
The important safety precautions and
instructions appearing in the manual are not meant to
cover all possible conditions and situations that may
occur. It must be understood that common sense and
caution are necessary factors in the installation and
operation of this fan.
2
