Savo T-9109-S, Инструкция по эксплуатации

Страница: 10 / 52

10
EN
USER MANUAL
WARNING
!
Always switch off the electricity supply before carrying
out any cleaning or servicing operations on the ap-
pliance.
!
Avoid using materials which could cause spurts of
flame (flambées) near the appliance.
!
When frying, take particular care to prevent oil and
grease from catching fire. Already used oil is espe
-
cially dangerous in this respect. Do not use uncove-
red electric grates.
!
To avoid possible risks of fire always comply with
the indicated instructions when cleaning anti-grease
filters and when removing grease deposits from the
appliance.
!
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with the
appliance.
!
Caution: accessible parts may become hot when
used with cooking appliances.
!
This kitchen hood is intended for installation in dome-
stic kitchens above cooktops, cooking devices and
similar kitchen equipment.
cONTROLS
A) Turns the LIGHTS off
B) Turns the LIGHTS on.
C) Decreases speed down to
minimum speed. If pressed
for 2” the motor is turned off.
D) Activates the motor (cal-
ling the last speed used) and
increases the speed until
reaching maximum.
E) FILTER ALARM/TIMER
RESET: when pressing the
key during display of the
filter alarm (motor off) it re
-
sets the hour counter. When
pressing the key when the
motor is running, the TIMER
is activated and the hood will
automatically be switched off
after 5 minutes.
L1) The 4 green LEDs indi-
cate the running speed.
L2) When the LED is red
(motor off) it indicates the
FILTER ALARM. When the
LED is green (flashing) it
indicates that the TIMER has
been activated with the key E.
FILTER ALARM:
After 30h of operation, the LED L2 turns RED. It indica-
tes that the grease filters need to be cleaned.
After 120h of operation, the LED L2 turns RED and
flashes; It indicates that the grease filters need to be
cleaned and the charcoal filters replaced.
After cleaning the grease filters (and/or replacing the
charcoal filters), restart the hour counter (RESET) by
pressing the key E during display of the filter alarm.
Replacing the leds
- Replace with leds of the same type.
MAINTENANcE
!
Before cleaning or maintenance cut the power.
cleaning the hood
WHEN TO CLEAN IT: clean it at least every 2 months
to prevent the risk of fire.
EXTERNAL CLEANING: use a cloth moistened in luke-
warm water and neutral detergent (for painted hoods);
use specific products for steel, copper or brass hoods.
INTERNAL CLEANING: use a cloth (or brush) soaked
in denatured ethyl alcohol.
WHAT NOT TO DO: do not use abrasive or corrosi-
ve products (e.g. metal sponges, brushes, too hard
brushes, very aggressive detergents, etc.)
A
B
C
D
L1
E
L2
OFF
ON
OFF/-
ON/+
R