Mount the plate of the electrical system fixing it with 3
screws and 2 metal washers.
Run the power cable through a small hole in bracket.
Mount the telescopic structure to the bracket with 4
screws.
Adjust height and tighten screws
D
.
Make sure that installation is firm!
Note : minimum distance
C
B
D
IH-61 11/2008
EN
Hood without own motor should be connected to exhaustion flue with external motor installed.
Air and steam goes out from exhausting flue.
Control panel controls the function of external motor.
In appartment buildings or similar central ventilating systems
connecting to exhausting flue is forbidden!
AIR VENTING
INSTALLATION
Before installation:
•
Switch/plug must be in available place
•
Exhausting: reserve 150/125mm flue
(not included in delivery of product)
Detach grease filters by pressing the locking
C
.
Mounting:
Mark the central position of the hood to the
roof. Use the enclosed drilling template.
NOTE:
position of the bracket determines the final
position of the
hood.
Drill the holes according to template. Mount the bracket
so hole
B
is on the
OPPOSITE
side of control panel
.
(mounting fittings supplied with the unit).