Savin Copier SDC326, Руководство по копированию

Страница: 51 / 112

Basic Procedure
41
2
E
Adjust the paper guides to the paper size.
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Note
❒
Make sure the paper size and direction in the bypass tray is displayed on
the operation panel.
❒
Make sure that the paper guides matches to the paper size. If the paper
guides are not adjusted to the paper size properly, paper might be skewed
or a paper misfeed might occur.
❒
With large copy paper (more than A4
L
, 8
1
/
2
"
×
11"
L
), swing out the ex-
tender.
F
With the side you wish to copy onto face up, insert the paper into the by-
pass tray until it stops.
G
Set your originals, then press the
{{{{
Start
}}}}
key.
Copying onto custom size paper with the bypass tray
Preparation
You can register custom paper sizes you use often in keys [ Custom 1 ] , [ Custom
2 ] , and [ Custom 3 ] with the user tools.
⇒
P.175 “System settings” .
Note
❒
Be sure to set the paper size or a paper misfeed might occur.
A
Open the bypass tray.
B
Press the [ Normal ] , [ Thick ] or [ OHP ] key.
C
Press the [
K K K K
/
L L L L
] key to select paper orientation.
TRSH050E
1
3
2
4
Trsh050e.eps