16
Save Marine, a division of
Save innovations
3 rue des arts et métiers, 38000 Grenoble, France I +33 (0)4 58 00 34 66 I [email protected]
Adjust the inclination of the control arm:
Tilt the control arm to enter slightly inside
the rear deck without obstructing traffic.
There are 3 holes in the fork and two holes
on the plate, which provide 6 different
angles for the control arm. Position the fork
with the appropriate holes and screw the
nut.
4.5.4
Automatic clamcleat
This is a security element: the clamcleat is
automatically activated and releases the
rope if the submerged part of the
hydrogenerator strikes a heavy object.
It ensures that the rope maintains the profil
arm and turbine in functioning position and
releases it in case of shock. This ensures
that the transom cannot be damaged.
The clamcleat is equipped with a two-
position pivoting finger:
- switch the finger on the left to release
the clam
- put back the movable part in its initial
position and rotate the finger on the
right to reset the Clamcleat.
OFF
ON
