9
Part No. 001188, 08-m05-2020
K2 Plus Stairlift Owner’s Manual
4. OPERATION
Before Operating the Stairlift
1
Ensure the stairway is clear of any obstructions and the stairlift charger is
plugged in at the wall.
2
Insert the key and turn it a quarter turn clockwise. Flip the ON/OFF power
switch to the ON position.
3
Check that the seat is locked in the riding position for up/down travel.
If the chair has not been used for over an hour, press the remote
button twice to wake it from sleep mode. If the chair has not been
used for over 24 hours, run the chair from the arm toggle switch
for a second to wake it from sleep mode. You can then use the
remotes for normal operation.
NOTE
Operating the Stairlift
1
If necessary, use the remote control to call the stairlift to the required end of
the rail for boarding. Be sure to point the remote at the lift when pressing
the button.
2
If necessary, fold down the seat, armrests, and footrest.
3
Lift up the seat swivel handle, rotate the seat to a comfortable boarding
position, and then release the swivel handle to lock the seat in place.
4
Ensure the seat is locked in place before boarding.
5
Position yourself in the seat and fasten the seat belt.
6
Lift up and hold the seat swivel handle and rotate the seat so you are parallel
to the rail (with your back against the wall). Release the swivel handle to lock
the seat in the riding position.
7
Place your feet securely on the footrest and your arms on the armrests.
8
Press and hold the toggle switch to move the stairlift in the desired
direction.
9
The stairlift will stop automatically at the upper or lower end of the rail, or if
the toggle switch is released.
10
Ensure the stairlift has come to a complete stop before exiting the chair.
