Savaria Infinity Скачать руководство пользователя страница 33

Страница: 33 / 60

Part No. 000783, 24-m09-2015

Infinity and Infinity HD Planning Guide

Pit details

42-

Hoistway and pit notes

• A load bearing wall is required to sustain rail reactions (refer to the section “Loads on building”

on the previous page).

• Suggested hoistway pit floor construction consists of an 8” (203 mm) concrete slab poured on

a natural or compacted soil with a minimum allowable bearing pressure of 1.0 KSF.

• The minimum compressive strength of the concrete at 28 days must be no less than 3000 PSI.

#5 reinforcing steel (grade 60) must be placed at the bottom of the slab in two traverse
directions and at a spacing of 12” (305 mm).

• Hoistway pit floor to support a load (including impact) of 5.6 kips (5600 lb/24.9 kN) for Infinity

or 8.22 kips (8220 lb/36.6 kN) for Infinity HD.

• Minimum overhead clearance of 92” (2337 mm) for 80” (2032 mm) cab, 96” (2438 mm) for 84”

cab, and 108” (2743 mm) for 96” cab.

• Minimum pit depth of 8” (203 mm) for Infinity and 12” (305 mm) for Infinity HD.
• Hoistway sizes reflect running and access clearances only. Consult your local AHJ to assure

compliance with local codes.

• Hoistway is required to be free of all pipes, wiring and obstructions not related to the operation

of the elevator.

Cab

Pit

Guide rails

Rail bracket

Guide rails

Upstand post for
hydraulic jack

8” (203 mm) or

min. pit depth

12” (305 mm)

Содержание Infinity




























































Результаты поиска

Содержание Infinity

Отзывы:

Savaria Infinity, Руководство по планированию, Страница: 33 / 60

Результаты поиска

Содержание Infinity

Отзывы: