manualshive.com logo in svg

Savant PAV-AIM7C, Руководство по развертыванию

Поделиться
Скачать
Savant PAV-AIM7C Скачать руководство пользователя страница 28

28   of   35

Savant IP Audio Deployment Guide
009-1571-02  |  190508

Copyright © 2019 Savant Systems, LLC

8.3  Multi-Switch Blueprint Layout with 16 AVB devices

The example image below shows only the IP Audio/IP Video devices and the AVB/TSN switches to illustrate how to configure a multi-switch AVB 

deployment which will function as a “single switch”.  AVB switches can be “daisy-chained” as shown below in configurations where the number of IP 

Audio/IP Video devices exceeds the available number of ports on a single switch.  
Note that while this example uses 5-pot MOTU AVB switches, there are supported AVB switches with Component Profiles available in the RacePoint 

Blueprint Library with more than 5 available ports per switch.

IMPORTANT INFORMATION!

•  AVB/TSN switches must be 

daisy chained using AVB ports.

•  The annotation shows AVB_01 

connected to AVB_02, all AVB/

TSN switches are connected in 

this manner.

•  Only one of the AVB/TSN 

switches should be physically 

connected to the rest of the 

network via its uplink port. As 

noted above, this connection 

is not represented within 

Blueprint.

Содержание PAV-AIM7C




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды