17 of 35
Savant IP Audio Deployment Guide
009-1571-02 | 190508
Copyright © 2019 Savant Systems, LLC
4.6 Relay Connections
The PAV-SIPA125SM features a relay port, used to control components via a normally open (NO) or normally closed (NC) relay.
4.7 Network Connection
Savant IP Audio devices use a standard RJ-45 port complying with IEEE 802.3 Ethernet standards. This port also supports Audio Video Bridging (AVB)
or Time Sensitive Networking (TSN) over Ethernet (AVB/TSN, IEEE 802.1).
4.8 AC Power Connection
Read and follow all warnings and instructions related to the AC power connection below.
SURGE PROTECTION!
Use a surge-protected circuit for all components and power supplies requiring 100/240V (AC 50/60 Hz) source power.
ELECTRICAL DISCONNECT!
The source power outlet and power supply input power sockets should be easily accessible to disconnect power in the event of an electrical hazard or
malfunction.
Power Management Recommendations
Savant recommends a pure sine wave uninterruptible power supply (UPS) with the ability to shut down the Savant Host before the battery runs out of
power. Never remove power from the Savant devices before shutting them down. See
Appendix E
for more information.
HELPFUL INFORMATION
:
Relay functionality for Savant Controllers is defined by physical wiring (which should follow
specifications for the controlled component), as well as the associated Profile used within RacePoint
Blueprint. For further information on programming GPIO and/or relay ports, refer to the
Relay
and General Purpose Input/Output Profiles - Application Note
, available on the
