Savage Light F-106 DELTA DART, Руководство по монтажу

Страница: 26 / 62

61. Glue 1/2” balsa triangle stock to the front of
B10B and the bottom of K1. (Photo 66)
62. Tape some plastic sandwich wrap to the pane.
Working one pair at a time, place the hatch
rails for the gear hatch, battery compartment
hatch and fan hatch on the plastic wrap.
Press a 1/4” x 1/16” magnet into the 1/4” holes
in the rails and glue the magnets to the rails
using thin CA. (Photo 67)
NOTE: the glue will stick better to the magnets
if you use some fine sandpaper to scuff the
edges of the magnets before you glue them
into place.
63. Place, but do not glue the hatch rails into their
respective slots in the bulkheads. The next
series of photos will document the construction
of the fan hatch. (Photo 68)
NOTE: The nose gear hatch and battery
compartment hatches are constructed in the
same manner, so photos of these hatches
being built will not be shown.
Photo 66
Photo 67
Photo 68
24
Savage Light Industries F-106 Delta Dart