Procedure
10
52 ASVxxx
3.2
Mechanical inspection of the VAV compact controller
Check the VAV box and the VAV controller. Make sure the ASV is firmly
mounted on the VAV box and damper adapter is correctly seated. Tighten
the screw fittings and check the tightening torque of the fixing screw (see
ASV fitting instructions, Fig. 4.1 steps 7, 8 and 9). Remove any dirt, dust
and accumulated deposits.
Fig. 2: Mounting the ASV on the VAV box
Check the electric contact terminals at the end of the power cable and
tighten them.
