Step 13
417146
www.sauder.com/services
Page 18
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35AC) to the DRAWER RIGHT SIDE (D30)
and a DRAWER LEFT (35AD) to the DRAWER LEFT SIDE (D31). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
å
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT"
for easy identifi cation and the glides are not intended to rotate.
å
NOTE: The screw head in the CAM must be visible through the
slotted hole in the SLIDE.
å
Repeat this step for the remaining drawers.
1
2
1
2
Glide end
Glide end
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
10A
D31
D30
If you're doing this to
help a friend, don't
leave without a bite.
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
3S
(4 screws per drawer)
