Step 29
418648
www.sauder.com/services
Page 34
å
Fasten the DRAWER BACK (D151) to the DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D954) inserts into the groove of the DRAWER BACK (D151).
å
Repeat this step for the remaining drawers using parts D24, D25, D149, D953 and V.
Groove
D28
D28
D28
D29
D29
D29
D954
D954
D151
Q
Q
Unfi
nished
sur
face
VIEW THE T-LOCK BOX VIDEO
1
2
3
å
Insert the DRAWER SIDES (D28 and D29) at an angle into
the slot at each end of the DRAWER FRONT (Q).
å
Slide the DRAWER BOTTOM (D954) into the grooves in the
DRAWER SIDES (D28 and D29) and DRAWER FRONT (Q).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(12 used in this step)
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
30S
