Step
419128
www.sauder.com/services
Page 19
Step 14
å
Separate the EXTENSION SLIDES (T) from the EXTENSION RAILS (S) as
shown in the enlarged diagram below. Be prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (S) to the LONG EXTENSION BLOCKS (K).
Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
å
NOTE: Slide the inner cartridge of the EXTENSION RAIL in to fi nd the
holes that line up with the holes in the LONG EXTENSION BLOCKS. Turn
a SCREW into each hole.
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S
Push the black lever in and pull the SLIDE from the RAIL.
T
S
K
S
Open end
Use these holes.
