Step
419128
www.sauder.com/services
Page 17
Step 12
å
Carefully turn your unit over onto its front edges. Lay the
BACK (G) over your unit.
å
Make equal margins along the bottom and side edges
of the BACK (G). Push on opposite corners of your unit if
needed to make it "square".
å
Fasten the BACK (G) to your unit using the NAILS (1N).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(16 used in this step)
1N
G
Edge without holes
