Step 5
423003
www.sauder.com/service
Page 9
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Caution
!
54M
15F
15F
å
First, fi ll the center holes in the short edges of the BACK PANEL (C) 1/4
to 1/2 full with GLUE (54M). Then, insert two WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
å
Now, fi ll the hole in the HEADBOARD/FOOTBOARD (B) 1/4 to 1/2
full with GLUE. Fasten the HEADBOARD/FOOTBOARD (B) to the
BACK PANEL (C). Tighten two HIDDEN CAMS. Wipe away the
excess glue.
å
NOTE: Be sure the WOOD DOWEL in the BACK PANEL inserts into
the hole in the HEADBOARD/FOOTBOARD.
Sur
face with
HIDDEN CAMS
The CABINET RAIL
should be here.
Rounded edge
Rounded edge
B
C
