å
Turn eight BLACK 9/16" FLAT HEAD SCREWS (FFF) into the
ENDS (A and B) until the shoulders of the SCREWS rest on the
surfaces of the ENDS.
å
Slide the END MOLDINGS (M75) onto the ENDS (A and B).
Line up the grooves in the MOLDINGS over the heads of the
SCREWS in the ENDS and slide them until they are against the
FRONT LEGS (O and P).
å
Fasten the REAR LEGS (Q) to the ENDS (A and B). Use
six BLACK 2 1/4" FLAT HEAD SCREWS (AAA).
Step 4
412922
www.sauder.com/services
Page 9
A
B
AAA
AAA
P
O
Q
Q
BLACK 9/16" FLAT HEAD SCREW
(8 used in this step)
FFF
BLACK 2-1/4" FLAT HEAD SCREW
(6 used in this step)
AAA
Angled edge
Angled edge
Apply pressure with your hands as
you guide the MOLDINGS over the
SCREWS and onto the END.
Shoulder
M75
M75
M75
M75
M75
