Step 12
412922
www.sauder.com/services
Page 17
å
Carefully turn your unit over onto its front edges. Unfold the BACK (L) and
lay it over your unit.
å
Make equal margins along all the long edges of the BACK (L). Push on
opposite corners of your unit if needed to make it "square".
å
Fasten the BACK (L) to your unit using the NAILS (LLL).
å
NOTE: Be sure to tap NAILS into the holes that line up over the UPRIGHTS.
å
NOTE: Perforations have been provided for access through the BACK.
Carefully cut out the holes needed.
å
Fasten the EXTENSION BLOCK (Y) and FOOT BASE (LL) to the
BOTTOM (G). Use four BROWN 1-5/8" FLAT HEAD SCREWS (CCC).
å
Push the CENTER FOOT (KK) into the FOOT BASE.
å
NOTE: Turn the adjustable end of the ADJUSTABLE FOOT completely in.
Final adjustments will be made after the unit is
standing upright.
L
Y
KK
LL
Unfi
nished
sur
face
G
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
BROWN 1-5/8” FLAT HEAD SCREW
(4 used in this step)
CCC
These holes must be here.
These holes must line up over
the UPRIGHTS (C and D).
Turn completely in.
NAIL
(60 used for the BACK)
LLL
