Sauder Edge Water 422406, Руководство пользователя

Страница: 14 / 24

Step 10
422406 www.sauder.com/services Page 14
VIEW THE T-LOCK BOX VIDEO
å
Fasten the DRAWER BACK (D154) to the DRAWER SIDES (D16 and D17). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D959) inserts into the groove of the DRAWER BACK (D154).
1 2
3
å
Insert the DRAWER SIDES (D16 and D17) at an angle
into the slot at each end of the DRAWER FRONT (K).
å
Slide the DRAWER BOTTOM (D959) into the grooves in the
DRAWER SIDES (D16 and D17) and DRAWER FRONT (K).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Groove
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
D16
D17
D959
D959
D16
D154
D17
K
Unfi
nished
sur
face
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
D16
D17
K