Step
Step 13
å
Insert the DRAWER SIDES (D12 and D13 ) at an angle
into the slot at each end of the DRAWER FRONT (K ).
å
Slide the DRAWER BOTTOM (D723) into the grooves in
the DRAWER SIDES (D12 and D13) and DRAWER FRONT (K).
å
Fasten the DRAWER BRACE (M67) to the DRAWER
FRONT (K). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D115) to the DRAWER
SIDES (D12 and D13) and DRAWER BRACE (M67). Use five
BLACK 1-9/16” FLAT HEAD SCREWS (30S). Repeat this
step for the other DRAWERS (J and L).
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
UNFINISHED
1
2
3
4
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
K
D12
D723
D115
D13
K
K
D12
D13
D12
D13
Groove
Arrow
Minimum
190 degrees
Maximum
210 degrees
Surface with
HIDDEN CAM
VIEW THE T-LOCK BOX VIDEO
414986
www.sauder.com/services
Page 17
M67
M67
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(15 used in this step)
