Step
Step 11
å
Carefully turn your unit over onto its front edges. Lay the
BACK (H) over your unit.
å
Make equal margins along all four edges of the BACK (H).
Push on opposite corners of your unit if needed to make it
“square”.
å
Fasten the BACK (H) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the LOWER UPRIGHTS (D).
These holes must line up over
the LOWER UPRIGHTS (D).
NAIL
(42 used in this step)
1N
H
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
414986
www.sauder.com/services
Page 15
