Step 4
416039
www.sauder.com/services
Page 8
å
Turn eight BLACK 9/16" FLAT HEAD SCREWS (32S)
into the UPRIGHTS (D and E) and UPPER BACK (K) until
the shoulder of the SCREWS rest on the surface of the
UPRIGHTS and UPPER BACK.
å
Slide the RAILS (R, S, and T) and UPPER BACK MOLDING (W)
onto the UPRIGHTS (D and E) and UPPER BACK (K). Line up
the groove in the RAILS and MOLDING over the head of the
SCREWS in the UPRIGHTS and BACK.
Shoulder
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
BLACK 9/16" FLAT HEAD SCREW
(8 used in this step)
32S
Remember:
Righty tighty.
Lefty loosey.
D
E
K
T
W
S
R
Sur
face without
HIDDEN CAMS
Surface without
HIDDEN CAMS
