Step 21
416039
www.sauder.com/services
Page 25
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
in the PANELS (B and C). Set the ADJUSTABLE SHELF (J) onto the METAL PINS.
å
NOTE: If using the diagonal Shelf assembly, the ADJUSTABLE SHELF will sit directly on top of the Shelf assembly. You
will not use the METAL PINS and RUBBER SLEEVES.
å
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on
the unit. Lift the front of the drawer up and slide it into the unit.
B
C
J
(4 used)
2R
1R
60 lbs.
10 lbs.
40 lbs.
25 lbs.
