Step 5
A
B
B
å
Flip the ENDS (A and B) over. Turn twelve BLACK 9/16" FLAT HEAD SCREWS (32S) into the END/UPRIGHTS (B) and
RIGHT END (A) until the shoulders of the SCREWS rest on the surfaces of each part.
å
NOTE: Do not overtighten the SCREWS.
å
Slide the END/UPRIGHT MOLDINGS (S) onto the END/UPRIGHTS (B) and the RIGHT END MOLDINGS (R) onto the
RIGHT END (A). Line up the grooves in the MOLDINGS over the heads of the SCREWS in the ENDS.
å
NOTE: The MOLDINGS should be even on both edges of the ENDS.
å
NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again.
BLACK 9/16" FLAT HEAD SCREW
(12 used in this step)
32S
Shoulder
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Sur
face without
HIDDEN CAMS
Sur
face without
HIDDEN CAMS
Sur
face without
HIDDEN CAMS
BLACK 9/16" FLAT HEAD SCREW
32S
BLACK 9/16" FLAT HEAD SCREW
R
R
S
S
S
S
424198
www.sauder.com/services
Page 9
