Sauder 420456, Инструкция пользователя

Страница: 15 / 28

Step 11
420456 www.sauder.com/service Page 15
VIEW THE T-SLOT BOX VIDEO
1
3
2
4
å Pull the DRAWER FRONT BRACKETS (9G) apart and slide them
into the grooves in the DRAWER SIDES (D36 and D37). You may
need to gently tap them in with a hammer.
å NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å Fasten the LARGE DRAWER FRONT (H) to the DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the DRAWER BOTTOM (D974) into the grooves
in the DRAWER SIDES (D36 and D37) and LARGE
DRAWER FRONT (H).
å
Fasten the DRAWER BRACE (M67) to the LARGE
DRAWER FRONT (H). Tighten one HIDDEN CAM.
å Fasten the DRAWER BACK (D167) to the DRAWER
SIDES (D36 and D37) and DRAWER BRACE (M67). Use
fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å Repeat this step for the other drawers. Use the SMALL
DRAWER FRONT (I), SMALL DRAWER SIDES (D42
and D43), SMALL DRAWER BACK (D165), and SMALL
DRAWER FRONT BRACKETS (7G) for the small drawers.
BLACK 9/16" LARGE HEAD SCREW
(20 used in this step)
1S
D36
D974
D167
D37
H
H
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(30 used in this step)
M67
Arrow
Maximum
210 degrees
Minimum
190 degrees
Groove
D36
D37
H
D36
D37
M67
9G
Unfi
nished sur
face
Push down
Surface with
HIDDEN CAM
Hidden part using
recycled material.
Color may vary.