Step 14
å
1. Insert the DRAWER SIDES (D83 and D84) at an angle
into the slot at each end of the DRAWER FRONT (M).
å
2. Slide the DRAWER BOTTOM (D706) into the
grooves in the DRAWER SIDES (D83 and D84) and
DRAWER FRONT (M).
å
3. Fasten the DRAWER BACK (D74) to the DRAWER
SIDES (D83 and D84). Use four BLACK 1-9/16" LARGE
HEAD SCREWS (30S).
å
*U.S. Patent No. 6,413,007
414435
www.sauder.com/services
Page 18
M
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D83
D83
D83
D83
D84
D84
D84
D74
D706
M
M
Tab
Slot
Groove
Unfi
nished sur
face
1
st
2
nd
3
rd
Start each screw a few
turns before completely
tightening any of them.
30S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
30S
