Separate the EXTENSION SLIDES (W) from the EXTENSION RAILS (V) as shown in the upper diagram. Be prepared, the parts
are greasy.
Fasten the EXTENSION RAILS (V) to the ENDS (A and B). Use eight GOLD 5/16" FLAT HEAD SCREWS (MM) through the 1st
and 3rd holes from the open end of the SLIDES.
7
7
S
te
p
A
B
Push the release lever in and pull the SLIDE from the RAIL.
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Open end
Open end
MM
V
V
V
W
Page 11
www.sauder.com/services
412321
V
V
