Step 3
å
Separate the EXTENSION SLIDES (PP) from the EXTENSION
RAILS (OO) as shown in the upper diagram below. Be prepared, the
parts are greasy.
å
Fasten the EXTENSION RAILS (OO) to the RIGHT END (A) and
UPRIGHT (E). Use four GOLD 5/16" FLAT HEAD SCREWS (QQQ).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole
shown in the enlarged diagram. Then, slide the inner cartridge of the
EXTENSION RAIL out to fi nd the other hole that lines up with the
hole in the ENDS and UPRIGHTS. Turn a SCREW into this hole.
å
Fasten the CABINET RIGHT (40CA) and CABINET LEFT (40CB) to
the RIGHT END (A) and UPRIGHT (E). Use four GOLD 5/16" FLAT
HEAD SCREWS (QQQ) through holes #1 and #3.
409043
www.sauder.com/services
Page 8
E
A
1
2
3
4
1
2
3
4
Roller end
Roller end
Hole
Push the black lever in and pull the SLIDE from the RAIL.
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
QQQ
PP
OO
OO
OO
Open end
Open end
