Saturn 2010 VUE, Руководство пользователя

Страница: 190 / 398

7-24 Infotainment System
4. Continue entering digits until the
number to be dialed is complete.
After the whole number has
been entered, say
“ Dial ” . The
system responds with “ OK,
Dialing ” and dials the number.
. If an unwanted number is
recognized by the system,
say
“ Clear ” at any time to
clear the last number.
. To hear all of the numbers
recognized by the system,
say
“ Verify ” at any time and
the system will repeat them.
Using the Call Command
1. Press and hold
J
/
0
for
two seconds. The system
responds with
“ Ready ” followed
by a tone.
2. Say “ Call ” . The system responds
with “ Call using <phone name>.
Please say the name tag ”
followed by a tone.
3. Say the name tag of the person
to call.
. If the system clearly
recognizes the name tag it
responds with
“ OK, calling,
<name tag> ” and dials the
number.
. If the system is unsure it
recognizes the right name
tag, it confirms the name
tag followed by a tone.
If the name tag is correct,
say
“ Yes ” . The system
responds with “ OK, calling,
<name tag> ” and dials the
number. If the name tag is
not correct, say
“ No ” . The
system will ask for the
name tag to be re
‐ entered.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re ‐ dial Command
1. Press and hold
J
/
0
for
two seconds. The system
responds with
“ Ready ” followed
by a tone.
2. After the tone, say “ Re ‐ dial ” . The
system responds with “ Re ‐ dial
using <phone name> ” and dials
the last number called from the
connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
. Press
J
/
0
and begin speaking
to answer the call.
. Press − /
K
to ignore a call.