10
IMPORTANT:
•
If multiple SS9007s are being used to monitor a polyphase phase load, care must be taken
to ensure each SS9007 is powered by the corresponding phase.
Figure 3: Example three phase installation. Note that each Mini CT Meter is powered by the circuit it is monitoring.
7.
If your Mini CT Meter has switching capability, the two terminals marked 'SWITCH' are
connected internally to an isolated relay rated for 5A at 240V. The front panel button will
glow amber to indicate that the relay is closed. This relay can be used to switch an external
relay, contactor, or control system. Refer to the relevant documentation when connecting
this Mini CT Meter to a third party control device. See Section
6 Switching
for more
information.
