SATO TXPEX6, Быстрый старт, Страница: 8 / 16

TXPEX6
6. Swing open the guide bracket.
7. Lift the print head block.
8. Remove the bubble wrap.
N ote: Keep the twist tie and bubble wrap for future transportation of the
printer.
9. Close the print head block (do not lock the guide bracket and head
lever).
10. Gently push the media sensor (green bar) all the way inward toward
the interior printer wall.
11. Lift the print head block completely up and then back down.
This action will set the default media sensor position for SATO notched tags.
3
Initial Setup