6
Measurements and Settings
The power is turned on and a measured value is displayed on the LCD when the trigger is pulled.
Press the
MODE
key to select a measurement or setting mode. The sequences for measurement or
setting modes are as follow:
Note
: The instrument stores the selected mode at the time of turning the power OFF.
∙ Normal Mode: Measurement mode at normal
∙ MAX Mode: To display a maximum value
∙ MIN Mode: To display a maximum value
∙ AVG Mode: To display an average value
∙ ΔT Mode: To display a ΔT value that is a difference between maximum and
minimum values
∙ DATA Display: To display a stored data
∙
ε
: Setting an emissivity
∙ HAL: To set an upper threshold for alarm
∙ LAL: To set a lower threshold for alarm
LAL
HAL
ε
DATA
Setting Mode
Δ
T
AVG
MIN
MAX
Normal
Measurement Mode
