9
Data Storing (Memory) Function
A measured value displayed in the smaller measurement displaying area can be stored and
loaded later on. The instrument can store up to 10 data.
All stored data do not get deleted even the battery is taken out from the unit.
Storable Data
Measurement Mode
Setting Mode
Normal Mode
Measured values
MAX Mode
MAX values
MIN Mode
MIN values
AVG Mode
AVG values
∆T Mode
∆T values
Note:
Data cannot be stored during operating a setting mode.
∙ Storing Data
1. Select a Measurement Mode for the data to be stored.
The
“
DATA” character blinks during the Measurement Mode to indicate the unit is enabled to
store data.
2. Press the
key.
After a beep, the data displayed in the smaller measurement display area is stored.
* About Data Numbers
Select a data number (from 1 to 9 and A) where the data is to be stored by using and
keys.
The data numbering sequence is as follows:
DATA1, DATA2, …, DATA9, DATA A
If a data number is not selected, a stored data is automatically numbered according to the
sequence above. If there is already a data stored, the data will be overwritten.
3. After data is stored, the system automatically switches to the Measurement Mode.
∙ Loading Data
1. Select the “DATA” from the Setting Mode.
2. Select a data by using
and
keys.
∙ Deleting Data
1. Select the “DATA” from the Setting Mode.
2. Select the “DATA0”. “-CL-“ is displayed on the smaller measurement display area.
3. Press the
key. The selected data is deleted after beep-beep.
4. After data is deleted, the system automatically switches to the Measurement Mode.
Note
: The Delete Data function deletes all data stored in the unit. Individual delete is not possible.
