manualshive.com logo in svg

SATO iGT400 Series, Инструкция по эксплуатации

Поделиться
Скачать
SATO iGT400 Series Скачать руководство пользователя страница 47

Operating the printer

In operation of the printer, understand and learn how to operate this printer.

Before operating

Before starting to use this printer, read the following operating procedures. This printer can be 

easily operated with the two buttons on the operation panel and the operation buttons in the 

operation panel cover.

This printer is operated from one of the five types of status: Online, Offline, Printer Setting mode, 

Error, and Test mode.

Understand the five types of status and operation procedure.

▲

Operation procedure

Turn on the power 

of the printer

Normal

ONLINE status “ON LINE”

The printer status is normal and printing can begin.   

Test mode status “TEST PRINT MODE”

 

Test print can be performed.

Error occurs

Error status “xxxx ERROR”

 

The setup of the printer is not done correctly. 

Error messages such as “HEAD OPEN,” “PAPER END” 

appear on the display.

OFFLINE status “OFFLINE”

 

The printer is stopped in printing.

When the  LINE  button 
is pressed while it is 
ONLINE

When the  LINE  button 
is pressed while it is 
OFFLINE.

Printer setting mode status   

 

Press the      ,     ,     , and       buttons to toggle User 

Mode, Interface Mode, Cartridge Mode, SBI Mode, 

Advanced Mode, and HEX Damp Mode.

When the  ENTER  button is pressed 

while it is OFFLINE

Turn on the power of the 
printer while pressing the  
 FEED  button.

42

サトー取説_E  04.8.17 6:22 PM  ページ 42

Содержание iGT400 Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды