12. If the printer feeds 20" of blank labels and stops with a “SENSOR ER-
ROR” on the LCD screen, check to make sure the labels are properly
routed through the label sensor and not over the top of it.
13. Turn AC power off by placing the POWER switch in the “0” position.
Printing a Test Label
After labels and ribbon are loaded into the printer, a test label can be printed
using the Front Panel Controls.
1.
Apply power to the printer while simultaneously pressing the FEED
key.
2.
The printer will beep once and display a “USER TEST PRINT, Small
Large” on the LCD screen.
3.
Large is the default selection. If you have labels loaded that are at least
4" wide, use the Large selection. If your labels are smaller than 4"
Ribbon Rewind
Spindle
Label Roll
Ribbon Path
Head Latch
Sensor
Assembly
Label Path
Label Roll
Retainer
Label Edge
Guide
Label Supply
Spindle
Ribbon Supply
Spindle
CL408/412 Quick Guide
PN 9001067 Rev A
Page 6