Section 1: Introduction
Page 1-2
CG4 Series Operator Manual
1.2 UNPACKING
When unpacking the printer, take note of the following:
1.
The box should stay right-side up.
Lift the printer out of the box carefully.
2.
Remove all the packaging from the printer.
3.
Remove the accessory items from their protective containers.
4.
Set the printer on a solid, flat surface. Inspect the shipping container and printer for any sign of damage
that may have occurred during shipping. Please note that SATO shall hold no liability of any damage of any
kind sustained during shipping of the product.
Notes
•
If the printer has been stored in the cold, allow it to reach room temperature before turning it on.
•
Please do not discard the original packaging box and cushioning material after installing the printer. They
may be needed in future, if the printer needs to be shipped for repairs.
1.2.1 Included Accessories
After unpacking the printer, verify that you have the following materials:
User Documents
(Quick Guide, Warranty, etc)
* The shape of the power plug may vary, depending on the location where it was purchased.
Power plug*
AC adapter
