SATO ARGOX OS-200 Series, Руководство пользователя

Страница: 56 / 67

OS-214EX / OS-200
User Manual
50
The printing position is not correct

Did you use the correct media type for printing?

The media is not loaded correctly. See the “Loading Media” section to reload the
media.

The media sensor needs to be calibrated. See the “Media Sensor Calibration”
section to calibrate the sensor.

The media sensor is dirty. Clean the media sensor.
Nothing is printed

The media is not loaded correctly. See the “Load Media” section to reload the
media.

The ribbon is not loaded correctly. See the “Load Ribbon” section to reload the
ribbon.

The print data might not be sent successfully. Make sure the interface is set
correctly in the printer driver, and send the print data again.
The print quality is poor

The printhead is dirty. Clean the printhead.

The platen roller is dirty. Clean the platen roller.

Adjust the print darkness, or lower the print speed.

The media is incompatible for the ribbon. Use the compatible media instead.