SATO 8161-00, Инструкция по эксплуатации

Страница: 57 / 80

−55 −
How to set the logging option
Tips: Aside from the steps below, you can also set the logging option from
DATALOGGER for Windows. For further information, please refer to
the online Help.
Be sure to erase all the data stored on the Datalogger before setting
the logging option.
For instructions on how to erase the data, please refer to step (9) of
Chapter 5 "Basic Operation."
(1) Press and hold the POWER ON/OFF key for one second or more to
turn on the Datalogger.
The LCD turns on to indicate that the SK-L200T II or SK-L200TH II
α is
in the measurement state for temperature or temperature and humidity,
respectively.
(2) Press the MODE key eight times.
(3) The logging option currently set is displayed.
Logging Option Upper LCD Lower LCD
Once (default) 1 O n E
Repeatedly (overwriting) 2 E n d
Ends at… (limited amount) 3 d A t A
By pages (partitioning) 4 P A G E