Sato Vicinity MDR-4330AT Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 26

Sato Vicinity MDR-4330AT Скачать руководство пользователя страница 14

MDR-4330AT USER MANUAL

13

83-00-001-DOC

MDR-4330AT with power & USB cables connected

3.3.2 Connecting a Reader to a Computer using Ethernet

Any number of  Readers  can  be  connected  to  a  local  network  using  an  Ethernet
hub/switch.  Plug  the  Ethernet  communication  cable  into  the  MDR-4330AT  RJ45 socket
(Ethernet port) and Ethernet Hub (Do not use a cross  over cable). All readers on the local
area network (LAN) will be accessible by all PC’s on the same LAN.

MDR-4330AT with power & Ethernet cables connected

3.4 Reader Manager Software Installation

Reader Manager is a graphical application for Windows. It provides a platform for reader
setup, configuration, demonstrations, testing and application development. When it is run,
Reader Manager can connect to a single reader at one time, it can switch between multiple
readers. Multiple copies of Reader Manager can be run, each of which can be connected to
different reader. The program provides a set of tools, each of which runs in a particular
demonstration, test or diagnostic window, all windows can be resized. This will be saved, so
the next time you run the Reader Manager, all windows will retain the size you set previously.
The position of the application on the Windows desktop is also retained.

«
...
12
13
14
15
16
...
»

Содержание MDR-4330AT



























Отзывы:

Нет отзывов