![background image](http://html1.mh-extra.com/html/satlab/pn-400-101/pn-400-101_user-manual_1201051028.webp)
w w w . s a t l a b g p s . c o m
2 8
SLC GNSS RECEIVER
Static Settings
The SLC has 32GB internal memory for logging RAW Static GNSS data. Selecting ‘Static’ Mode opens the page
Figure 3-18 below. Logging screens are also accessible from both Base and Rover mode setting pages and will
allow post-processing of the Base position or processing of the Kinematic file collected while used in Rover mode.
Figure 3-18
Typically Static logging will be done using the external SLGAT-35101H antenna but antenna settings are
available when using the SLC mounted on a Pole Bracket or in Handheld mode where the reference point
is the back of the SLC case.
The Static page allows entry for Logging Interval from 1 to 50 seconds, File name, Target height (distance
from ground point to ARP), and Elevation cut-off angle. When all information is entered press SET to
configure the receiver.
In Static mode the right LED will blink RED at the logging interval rate set to indicate a recording session
is active.
If a logging session is activated while in Base or Rover mode the right LED will be flashing YELLOW indicating
data transmission so the logging session is indicated by the left LED flashing YELLOW at the logging interval.
Содержание PN 400-101
