w w w . s a t l a b g p s . c o m
2 2
SLC GNSS RECEIVER
Click on SET and wait for a confirmation message
“Set
successful“.
There are two switches providing Advanced setting
capability and in the event of connection issues Network
Diagnosis. Generally it should not be necessary to use
these but if you experience Network connection issues
please contact Satlab for instructions and trouble
shooting proceedures.
Figure 3-8
Figure 3-9
Internet Tab
The
SLC Toolbox
software is controlled by tabs on the top
of the screen. The second tab ‘INTERNET ‘ enables input of
GSM settings. Tapping on the line for APN will enable virtual
keyboard with which you enter the parameters relevant to
your service provider. If your provider requires User name
and Password, please enter these on the next two lines
respectively.
Mode Tab
The MODE tab enables the setting of the operating mode
of the receiver. This can be either Base, Rover or Static
operation. Under each of these modes you have options for
transmission or reception of corrections and in Static mode
it enables Antenna selection, file naming and recording
parameters.
Tapping on Mode box will display the menu selection at
bottom then each selection will display the relevant setup
pages for that Mode.
Содержание PN 400-101
