26
6 BLUETOOTH CONNECTION
The Bluetooth connection of the KM-7 kappameter to a PC in the program KMdata is
established automatically when using Windows Vista, Windows 7 and higher (Microsoft
Bluetooth stack). This feature is available for almost all Bluetooth adaptors. In the Windows
XP, only few Bluetooth adaptors are supported, and the connection must be established
manually.
6.1
Standard Bluetooth connection
To use automatic Bluetooth connection, the KM-7 must be first bounded to PC. Note it
is assumed that drivers for the Bluetooth adaptor are installed (see your Bluetooth adaptor
manual). To bound the KM-7 with PC, the KM-7 must be turned on, Bluetooth enabled and
connection type to PC set in the Setup menu of the instrument.
To bound the KM-7 with a PC, you must first open
Bluetooth devices
.
Figure 6-1 List of paired Bluetooth devices
Then click on
Add a device
. The search for devices in range begins.
After searching has been done, you can see list of found Bluetooth devices in range.
Figure 6-2 Bluetooth devices search results
Select the KM-7 and press
Next
button. You will be asked to select pairing code
generation mode, see Figure 6-3. Select the
Enter the device’s pairing code
item.