Satimo EME Guard, Руководство пользователя

Страница: 26 / 40

25 / 37
3.5 D
ISPLAYING
T
HE
M
EASUREMENTS
Click on the Load button to display the file selection window. Select a measurement file
« .bin » (or « .mes » for measurements taken using the V1 version of the EME Guard
Analysis software). By clicking on OK, the measures displayed are in V/m by default in the
main window.
Four tabs are visible:
Figure 23 : Main screen – measurement display
Ö
Monitoring: shows the pattern of field results over the measurement time.
Ö
Statistics: shows the statistical results relevant to the loaded measurement.
Ö
Battery voltage evolution: shows the battery level throughout the measurement.
Ö
Temperature evolution: shows the temperature pattern throughout the
measurement
There is a fifth tab in some versions of the software:
Ö
Information: shows information relevant to the measurement.
The EME Guard automatically measures in V/m.
The EME Guard Analysis software enables these measurements to be recorded in different
units.
The Unit menu enables modification of the unit of measurement used to display the data.
Three units are possible: V/m, mW/cm² and W/m².
The following conversion rates are applied by the EME Guard Analysis software.
Conversion of unit
Field Power density
(V/m) (mW/cm
2
) (W/m
2
)
E
3770
2
E
377
2
E